1999 Johnson 225 HO
Mod #J225HPLEEN
SN#G04608634
I had the VRO changed and carbs rebuilt last year in the spring. When I initially start the motor and it warms up....I can idle around without any problems. If I make a long run......and then need to go through a no wake zone.....the "no oil" alarm will sound off after a few min. idling. I then turn the motor off.......squeeze the oil bulb, which is already rock hard, then start the motor again. It will idle fine for about 5 min.......then the alarm sounds again.
It will last about 10 min. if I'm pushing the boat a littler faster and blowing a wake...........but if I let it idle........the alarm comes on pretty quick.
It happens after I have made a WOT run most of the time.
I've also tired to bleed the oil line by removing the line from the VRO and having someone squeeze the oil bulb. While they are squeezing the bulb and oil is coming out.......I slide the oil line back on the VRO. I have done this twice, and it did seem to help, but this was last year. I thought there may have been an air bubble after the VRO change. But it is still doing it this year.
Any ideas. Sorry for the long post.
BS![]()