Thread: 1999 Ficht 225

Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Feb 2007
    Location
    Jacksonville
    Posts
    711

    1999 Ficht 225

    I have a 1999 Evinrude Ficht, It skips intermittently while idling almost like it has a cam in it and from about 1100rpm to 3500rpm it's constant skip. I know these motors have had issues with getting too much oil. I was reading on the Merc board and found this :

    http://www.bbcboards.net/zerothread?id=637339

    I'm wondering if it would be worth it to pull my powerhead (since I can do it myself at no cost) and take a look. I would like a tuner but cannot find one for an OMC. Do they make them? Where can I buy one?

    I put new plugs in, indexed, gapped, didn't change a thing.

    Thanks Guys

  2. Member
    Join Date
    Feb 2007
    Location
    Jacksonville
    Posts
    711
    #2

    Re: 1999 Ficht 225 (YoungBassin)

    ttt

  3. Moderator SEAHORSE's Avatar
    Join Date
    Jun 2004
    Posts
    9,638
    #3

    Re: 1999 Ficht 225 (YoungBassin)

    Your OMC motor is nothing like the Merc design under the powerhead.

    Poor idle can be any number of things or combinations thereof. Best to do a decarbon and a compression check, then have a trained professional do the serious troubleshooting for you.
    -----


    A Technical troubleshooter possessing more tools than talent !

  4. RIP Evinrude 1907-2020 JR19's Avatar
    Join Date
    Feb 2005
    Location
    Columbia, KY
    Posts
    13,425
    #4

    Re: 1999 Ficht 225 (SEAHORSE)

    I had a very similiar problem and it turned out to be my ECU. My motor would start and purr like a kitten but once it hit 3500-4500 rpm it would have a sever miss.

    At first I had a light miss in the 4500 range that only happened 1 out of 5 trips. A few months latter the light miss all of a sudden turned into a sever miss at 35-4500. Funny thing was my motor would start easy,idle easy and run WOT if you could get past the miss at 4500.

    My mechanic told me my computer/ECU was slowly breaking down and the ECU would eventually crap out. Hopefully your problem is not an ECU because they are not cheap to replace. My advise would be take your motor to a well trained certified Evinrude mechanic that is familiar with the Ficht motors.

  5. Member
    Join Date
    Feb 2007
    Location
    Jacksonville
    Posts
    711
    #5

    Re: 1999 Ficht 225 (JR19)

    I have already replaced the ECU

Similar Threads

  1. 1999 115 Ficht
    By slink16 in forum Evinrude/Johnson Motors
    Replies: 0
    Last Post: 08-02-2008, 05:58 AM
  2. 1999 FICHT 200
    By threedstarr in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 02-22-2008, 03:58 AM
  3. 1999 225 ficht
    By mingo in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 05-03-2005, 02:15 PM
  4. 1999 Evinrude 225 Ficht 1999 Javilen Renegade 20 Question
    By MDF in forum Evinrude/Johnson Motors
    Replies: 16
    Last Post: 04-06-2005, 12:49 PM
  5. 1999 Ficht 175
    By cottonboll in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 03-12-2005, 06:55 PM