This morning my buddy and I head out to the lake and unload the boat. I have owned carb'd car motors before, so I would expect them to be the same. You know the usual let the motor warm and and then take off. Well this didn't quite go that way. I let it idle for about 2mins then it died. Started it back up idle for a min tops then died again. If I tried to touch the hot foot it would die. So finally got it to run some what ok idling. Put the motor in gear it died. By this time I'm livid. Finally what I had to do was trany drop at around 2000 before i could go with out it dieing. After running down the lake it ran smooth as silk and idle like there was never anything wrong. Fished around for about 15-20 mins. Start the motor back up to head to a new spot. Exact same process over and over. And when I mean let it warm up, depending on outside temp I would let it idle for about 5 mins or so. Any thing will help I'm at a loss. To much gas, to lil. Hot foot not ajusted properly, because its a bear to press down.