I couldn't find anything about it on here so I did some oxidation removal research and found this "system". For those of you that already know about it sorry if it's a repeat. But it's an easy 3 step system. I'm selling my boat and want it to look good for the new buyer. The main thing bothering me was the cloudy / oxidation on the gelcoat of my red boat.
The first step is probably the most work intensive and most important. It's a chemical that is scrubbed on to remove the oxidation. Then you use the boat wash. The final step si to put on the restorer / sealer. It's as thin as water and goes on like a breeze. Like paint, the first coat is the hardest, and takes the most time. Subsequent coats get easier. The manual recommends 6-8 coats. I did a total of 7 coats.
The ENTIRE process took me only 2.5 hours on a 20' bass boat. I only did the top cap and that's all that was needed. Below it looked fine. The package cost about $60.00 and I got it at Boater's World.
If anyone wants a good product to make your boat snap this is it ! The manual that came with it is very detailed and even included FAQ's ...
Reply With Quote
that would have made sense now wouldn't it ... sorry ... i'm an idiot
