Well after a lot of post searching here I have decided that I am going to install a comfortroll in my boat. I have a 98 ZX 195C. only have a couple of questions that have not been answered so far. planning on sealing the edges of the wood that is cut into as others have done but what sealant are you using ? from what I have read most people are starting their cut 2 inches from the furthest part of the bow to avoid the front support. if it turns out that I end up cutting into the rear support, how are people bracing the area? thinking I will seal the underside of the lip with some 4200. if anybody has had the deck cut open on this model pics would be a real big help. thanks