My entire shifting/throttle lever feels a little loose, wobbles left to right, not much be enough to concern me. Plus there’s some small crews on the back side of the throttle handle that are very loose, small alum piece right at the bottom of the red neutral lever. When I pull up on the red neutral lever the aluminum piece slides out cuz the screws are backed out quite away and sometimes jams up my shifter. There in a difficult place to retighten and I can see they have a small torx head. I pried out the plastic cover that’s behind the lever and see some bolts but can’t get the cover off with the handle in place. Can someone tell me how to get this lever off so I can tighten everything back up. Thanks