What's the best style ear muffs to use on a 225HPDI. I have the round suction cup type and they just don't seal very well with the water pickup on the lower side of the lower unit gear housing. Any suggestions??
What's the best style ear muffs to use on a 225HPDI. I have the round suction cup type and they just don't seal very well with the water pickup on the lower side of the lower unit gear housing. Any suggestions??
How about hooking up a garden hose to the hose fitting on the port side of the motor?
I believe the hose attachment is for flushing the motor not to run it I believe that is what it says in the oweners manual. The rectagular ones work at least on my 150.
Stratos 285XL
Yamaha VMax 150
USAF 1968-1989
There is one made just for the hpdi style lower unit.Yamaha has one as a service accessory but it costs too much check west marine or some place like that
I have heard that the CLE model will work on the HPDI... Dont know for sure.
http://www.reynoldsracingmarine.com/flushers.htm
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
When your not flushing your motor, it could be used for those rough water rides to keep the boys cinched up tight
This looks pretty good. Anyone ever use one? I found what looks to be one being used on http://www.rockysmarine.com/motor_flushing.html. Want to be sure before I spend the 65 bucks.
Reply With Quote
.jpg)
