Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jun 2005
    Location
    Loveland, Ohio
    Posts
    1,060

    Need Torque spec for 2008 3.3L heads

    Are there any techs here that can tell me what is included in the 20hr. service and what the torque specs are for a 2008 3.3 250?

    plugs, torque heads, lower unit oil, reset oil pump?

    thanks

  2. Member
    Join Date
    Dec 2006
    Location
    SF BAY AREA
    Posts
    1,006
    #2

    Re: Need Torque spec for 2008 3.3L heads (FastBug250)

    time to buy a manual is the best bet
    the owners manual tells u evrything for the service

    shoot me an email if u need a manual


    HUMAN BUILT = HUMAN FIXED
    http://www.switchbait.com

    <U>CERTIFIED MARINE TECHNICIAN</U>

  3. Member
    Join Date
    Jul 2007
    Location
    Raleigh
    Posts
    832
    #3

    Re: Need Torque spec for 2008 3.3L heads (FastBug250)

    Heads are not re- torqued. Oil pump linage is looked at to make sure it is set for proper oiling. Plugs should be fine if you did them at 10 hours per manual. Filters should be good as well until at least 50 unless you’re having performance issues. I did my 10 micron per manual at 10 hours and will do it twice annual. Cheap insurance for 16 bucks.
    08 Ranger Reata 210
    Yamaha VMAX 225 HPDI

Similar Threads

  1. Torque spec?
    By armond in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 2
    Last Post: 03-06-2012, 09:56 AM
  2. Torque Spec
    By fastglass1 in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 6
    Last Post: 03-14-2010, 09:39 AM
  3. Bearing Nut Torque Spec?
    By Iowabass3826 in forum Trailers & Towing
    Replies: 1
    Last Post: 03-02-2010, 08:56 AM
  4. Head torque spec please!
    By Iowabass3826 in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 04-15-2008, 04:54 AM