<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by FishinIsHeaven »</TD></TR><TR><TD CLASS="quote">The dealer I take my boat to says ignore the torque spec and tighten them till your within 90 deg of either side of the injector. He said he got this advice direct from the rep and that the head was thick enough that there is no danger of stripping threads out. The only problem I've encountered is breaking the plugs upon removal which I understand is fairly common.
Blake</TD></TR></TABLE>
I'm sorry, but I will listen to the gurus here and they ALL say watch torque specs. I've never broke one off in my motor and i've never used more than 8 ,only that cause i'm a little picky. JMHO I will say this, I have stripped em out and the helicoils, etc aren't what they are cracked up to be in this application. Again JMHO
Reply With Quote