Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jul 2004
    Location
    York PA
    Posts
    3,245

    07 225 etec gear case?

    Model e225dhlsua.
    What would cause gear oil to leak from small hole on starboard side of case just forward of water intake?
    Scott

  2. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,174
    #2

    Re: 07 225 etec gear case? (scotty34)

    Water. Pull the prop and check for fishing line.

  3. Moderator SEAHORSE's Avatar
    Join Date
    Jun 2004
    Posts
    9,638
    #3

    Re: 07 225 etec gear case? (scotty34)

    Chances are the o-ring around the driveshaft bearing housing is leaking and/or sand has worn the 2 seals.

    The new improved o-ring is brown, not black. Be sure to replace both driveshaft seals and the o-ring, and your gearcase will be fine. If your motor is still in warranty, it is covered.

    Your motor is now 5 model years old so change out the water pump while the gearcase is removed if it hasn't been replaced within the past couple of years.
    -----


    A Technical troubleshooter possessing more tools than talent !

Similar Threads

  1. 2007 225 ho etec lighting gear case question?
    By Jbass2 in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 03-16-2012, 05:16 AM
  2. 2008 ETEC HO 250 Gear Case replacement
    By Just_Ken_In_Va in forum Evinrude/Johnson Motors
    Replies: 11
    Last Post: 02-28-2011, 01:10 PM
  3. Blown gear case, Etec 225
    By buzzn in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 09-07-2009, 07:45 PM
  4. Lightning Gear case VS Magnum Gear case
    By bear21211 in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 06-03-2008, 02:10 PM
  5. Gear case oil for 225 HO
    By massbaster in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 02-12-2008, 05:15 PM