I have a 2010 mercury 250 pro xs what do i need to do to store over the winter???
I have a 2010 mercury 250 pro xs what do i need to do to store over the winter???
2014 War Eagle 961 Tomahawk
2014 Yamaha F150 Four Stroke
2014 MinnKota 80# Fortrex
Lowrance HDS 10 and HDS9 Touch
LSS2 Sonic hub and Spotlight Scan
2012 xpress 1652
2012 mercury 4 stroke
#80 minnkota 3x hand control
What I do with mine is change the gear oil and flip the kill switch so it won't start and crank it over with full throttle and spray WD-40 in the butterfly to keep moisture from gathering in the engine (that's what my mechanic says to do) before that put stable in the gas and run it with the muffs on it and you should be good to go...![]()
I'd add trim the motor all the way down to make sure the water is out of the engine. Pull the plugs and fog the cylinders too. If you have a water pressure gauge, remove the hose from it and let it drain.
If you have integrity, nothing else matters. If you don't have integrity,
nothing else matters.
Glad I don't have to worrry about that in alabama, lol
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by foxman623 »</td></tr><tr><td class="quote">Glad I don't have to worrry about that in alabama, lol</td></tr></table>
Amen to that Brother right next door in GA!
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by foxman623 »</td></tr><tr><td class="quote">Glad I don't have to worrry about that in alabama, lol</td></tr></table>
I am with ya !!
if you have the original manual for the motor, there should be instructions as to what mercury recommends. if you don't have the manual, you should be able to download a copy from the mercury website
__________________________________________________ __
I reject your reality and substitute my own!
Actually here is what you want to do to your motor before storage. You do not want to spray WD40 into the cylinders.
http://www.bbcboards.net/zerot...gines