Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Sep 2006
    Location
    Levittown
    Posts
    38

    Etec operating temp range

    I just installed I-command gauges in my 2007 225 etec E225dpxsu. Can someone tell me what the maximum and minimum operating temps are?

  2. Member LIQUID NIRVANA's Avatar
    Join Date
    Aug 2006
    Location
    New South Wales, Australia
    Posts
    659
    #2

    Re: Etec operating temp range (imcap10ed)

    165 deg at idle

    145 degrees above idle to WOT in gear.

    ================================================== ==
    ALWAYS Prop your E-Tec to it\'s OPTIMUM RPM - CHECK yours HERE >> http://www.bbcboards.net/zerothread?id=703860
    `````````````````````````````````````````````````` `````````````````````````````````````````````````
    DEDICATED to the Preservation of OUR EVINRUDE_JOHNSON_OMC_E-Tec HERITAGE

    EVINRUDE CENTENARY YEAR: 1909 > 2009 \"100 years of FUN on the water\"

  3. Member
    Join Date
    Sep 2006
    Location
    Levittown
    Posts
    38
    #3

    Re: Etec operating temp range (LIQUID NIRVANA)

    Thanks for the reply, I'm seeing 167 in the driveway, I won't be able to get her wet for a few weeks yet. I really like the engine temp and fuel remaining features!

  4. Member LIQUID NIRVANA's Avatar
    Join Date
    Aug 2006
    Location
    New South Wales, Australia
    Posts
    659
    #4

    Re: Etec operating temp range (imcap10ed)

    167 is ok. She is designed to run hotter at idle. 145 whilst underway. If she runs colder at idle then running problems will occur.

    ken
    ================================================== ==
    ALWAYS Prop your E-Tec to it\'s OPTIMUM RPM - CHECK yours HERE >> http://www.bbcboards.net/zerothread?id=703860
    `````````````````````````````````````````````````` `````````````````````````````````````````````````
    DEDICATED to the Preservation of OUR EVINRUDE_JOHNSON_OMC_E-Tec HERITAGE

    EVINRUDE CENTENARY YEAR: 1909 > 2009 \"100 years of FUN on the water\"

Similar Threads

  1. Ok to run a motor past the recommended operating range?
    By MassBass320v in forum Yamaha Motors
    Replies: 13
    Last Post: 11-26-2011, 03:45 PM
  2. Operating range?
    By allskeeter in forum Yamaha Motors
    Replies: 5
    Last Post: 03-26-2008, 06:11 AM
  3. rpm operating range for 91 Evinrude 115
    By mlatham in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 11-03-2007, 12:24 PM
  4. Replies: 5
    Last Post: 08-11-2007, 01:27 AM
  5. operating rpm range on 96 intruder 175
    By tracy shannon in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 05-01-2007, 06:53 PM