Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Mar 2007
    Location
    PAW PAW
    Posts
    600

    60 degree verses flat 60 degree?

    Can anyone tell me if one is better than the other and if so why? or is it just whatever will fit in the mold?

  2. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,283
    #2

    Re: 60 degree verses flat 60 degree? (PUMA1973)

    The bend is the same, The eye direction is 90* twisted. I drill out the eyelet area deep in both sides of the mold and fill over full with red rtv high temp silicone. Let it dry and razor blade it off flush with the mold. Now you can use either hook if you like.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  3. Member
    Join Date
    Mar 2007
    Location
    PAW PAW
    Posts
    600
    #3

    Re: 60 degree verses flat 60 degree? (21XDC)

    thanks for the reply.
    i understand the difference physically with the 2 hooks. I am just curious why one would choose to use one over the other. i cannot see any reason they would make the action any different. i am guessing the plain 60 degree would grab less weeds, but such a little difference it really probably would never be noticed.

  4. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,283
    #4

    Re: 60 degree verses flat 60 degree? (PUMA1973)

    I think for rock type heads the flat eye is better, Weed type use the reg.

    BTW... I have spent some time on Ackley Lk and Maple lk in PawPaw. Been to both wineries. I liked that area. I had the fastest boat on Ackley at 83 mph from corner to corner. Maple I ran 86. Launched by the RR tracks.


    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  5. Member
    Join Date
    Jul 2007
    Location
    Kennesaw, GA
    Posts
    379
    #5

    Re: 60 degree verses flat 60 degree? (21XDC)

    For what its worth....I fished this weekend with both and I lost 15 3/8 arky with the 60 degree flat eye. I only lost 4 of the standard straight eye in the same head.

    I was fishing heavy cover under boat docks. Primarily docks with christmas trees and lots of cross members. The flat eye would not come through the cover....

  6. Member
    Join Date
    Mar 2007
    Location
    PAW PAW
    Posts
    600
    #6

    Re: 60 degree verses flat 60 degree? (gofishloop)

    thanks for the replies. we have the plain 60 degree hooks so i think we will just go with them for now.

    21xdc, i would hang with you on ackley but 83 is my limit so you'd get me on maple, that is if you are correct with the 86mph. i am wondering though if maybe you were at st. julians a little too long since i don't know of any railroad tracks to launch near.

  7. Moderator 21XDC's Avatar
    Join Date
    Sep 2004
    Location
    Westland Michigan
    Posts
    65,283
    #7

    Re: 60 degree verses flat 60 degree? (PUMA1973)

    Went to werners and stjulians.. I swear there were tracks near the ramp on Maple. I doubt you can run 83 in Ackley, It's short and you need a light boat with lots of power to get it there. What do you have to compete?

    The ramp is on the right as you come out of Ackley under the road through the tube. Maybe there were no tracks. They were pumping water or dredging the bottom I think at the time.

    Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html

  8. Member
    Join Date
    Mar 2007
    Location
    PAW PAW
    Posts
    600
    #8

    Re: 60 degree verses flat 60 degree? (21XDC)

    well to get to 83 on ackley , you have to start on maple and shoot the tube.
    I just have an '08 puma w/250proxs. like i said 83 is my limit.
    and yeah, i think you were in the wineries a little long, nearest tracks are probably a mile from the lake(nest to the wineries).
    Yeah, Paw Paw is a fun little town.
    you should look into coming in for the grape festival in sept. that saturday eve. is usually a good time at the wine tent with the bands, if you know what i mean.

Similar Threads

  1. 60 degree or 90 degree
    By manalive79 in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 03-18-2012, 05:42 PM
  2. what to do on 70 degree day :-)
    By HappyChamper in forum Champion Boats
    Replies: 6
    Last Post: 01-01-2011, 06:55 AM
  3. 60 degree block versus 90 degree block
    By TexasZX21 in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 10-05-2010, 03:59 PM
  4. 90 degree or 60 degree ?
    By Robbie in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 05-03-2008, 06:42 AM
  5. has anyone got 60 degree
    By oceansmasher in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 03-02-2006, 12:36 PM