Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Nov 2004
    Location
    Bentonville, Arkansas
    Posts
    765

    Using other props on a 2001 200hp RAM Ficht....is this common/recommended?

    i am experimenting with other props on my Evinrude 200 Ram Ficht. I am having good success with some mercury props. I bought the adapter kit and notice that the diameter of my OMC Renegade 27 BASS is 13 1/2 inches and most mercury props are significantly larger in diameter with the Bravo 1 being 15 1/4. Why are the OMC props smaller in diameter? Is there any reason why I should not run other props on my Rude to try to find the best combo for my Gambler bass boat? Thanks !

  2. Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,085
    #2

    Re: Using other props on a 2001 200hp RAM Ficht....is thi ... (GamblerSam)

    No, run any prop you want. You do need to check for clearance @ the torque tab.

Similar Threads

  1. Any adj necessary on 2001 200hp RAM Ficht to run XD 100 oil?
    By GamblerSam in forum Evinrude/Johnson Motors
    Replies: 7
    Last Post: 02-27-2012, 02:28 PM
  2. Does anyone know what HP at the prop for a 2001 RAM Ficht 200hp?
    By GamblerSam in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 10-10-2011, 05:13 AM
  3. Max RPM for Evinrude 2001 200hp RAM Ficht
    By GamblerSam in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 06-12-2011, 03:09 PM
  4. Recommended oil for 2001 200HP Ficht?
    By RangrDve in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 09-26-2008, 12:21 PM
  5. How Bad are the 2001 200hp Ficht Ram ?
    By Crankin in forum Evinrude/Johnson Motors
    Replies: 12
    Last Post: 03-18-2005, 09:11 AM