Hey guys gonna install a jackplate on my boat soon. Need some help finding the lift points on my evinrude. It is a 1996 200 vindicator model 200stledm. I have looked but cannot find any lift eyes. Does it have any or am I just blind?? Cmon championman I know you have the answer for me! Thanks alot
Not ChampmaN but..... he taught me well..A harmonic balancer puller with 1/2" eyebolt thru the middle, and 3 - 5/16thX24 NF X 3.5 bolts with washers on top of the puller threaded into the flywheel will do the job.
Hey thanks bassmeister all of you guys are more knowledgeable than I am!
Plus you can use the balancer puller with some all thread rods and use it to pull your rear bearing carrier on your lower unit to remove it to change out the seals.Good job grasshoppa!
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by ChampioNman »</td></tr><tr><td class="quote"> Plus you can use the balancer puller with some all thread rods and use it to pull your rear bearing carrier on your lower unit to remove it to change out the seals.
Many thanks O mighty sensei!!
Reply With Quote
