I'm blowing the 25 amp fuse to my reverse light - surge solenoid on my trailer. How do I check the solenoid for a short?
I that my meter and check the power wire to ground, it show continuity. The power is disconnected.
![]()
![]()
I'm blowing the 25 amp fuse to my reverse light - surge solenoid on my trailer. How do I check the solenoid for a short?
I that my meter and check the power wire to ground, it show continuity. The power is disconnected.
![]()
![]()
Follow the blue wire and make sure its not touching the frame or any other wires. Look for worn insulation on the wires. Look on the tow vehicle too.
![]()
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Well I might have it![]()
I guess we'll see, I never really saw anything wrong, it was originally wired to the right reverse light, I wired it to the left side. I backed up several times hard worked every time and didn't blow the fuse.
![]()
![]()
Thanks for the response Mike![]()