Results 1 to 2 of 2
  1. #1

    2000 225 FICHT debris in water outlet.

    Quick question. Model: E225FPLSSC SN: - G04815356

    The ‘pee stream’ on my 225 wasn’t peeing great a few weeks back. Removed the water outlet thing with a 13/16th socket. Found debris clogging the hole up, it appeared to look like flakes of rubber. I kinda of wrote it off thinking it’s probably been there a while. I checked it again yesterday after getting off the water and found another ‘flake’ (about half the surface size of a dime and about ½ the thickness of a dime) of something in there. I’m not 100% sure it’s rubber as I can break it up fairly easy, but acts very similar to old brittle rubber hose. Maybe the inside of old warn hose? The impeller is new last fall, but the dealer changed it so I’m not sure the condition of the old one.

    Anyone ever hear of anything like this? Maybe I’m overreacting and being too proactive. The engine runs well, pee’s strong, and shows about 3-5psi at idle and 20psi while on plane.

    Thanks,Pete

  2. Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,079
    #2

    Re: 2000 225 FICHT debris in water outlet. (Pete Bauer)

    Could be debris from the old impeller finally making it's way thru the system to the overboard discharge. I'd continue to monitor the wp for a few trips.

Similar Threads

  1. 2000 ficht water presure
    By bgib75 in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 10-24-2010, 12:34 PM
  2. water pressure fitting-2000 225 ficht
    By ben fishin in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 08-04-2009, 06:09 AM
  3. 2000 115 Ficht water pump
    By noelm in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 08-10-2008, 05:51 PM
  4. 2000 Ficht- no water pressure on gauge
    By woody912 in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 03-14-2007, 02:52 AM
  5. 2000 175 ficht water pump
    By trimchange in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 02-27-2007, 04:00 PM