Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Jun 2004
    Location
    Birmingham, Alabama
    Posts
    1,000

    Motor bogged today ?

    2004 HPDI 300, started fine this morning. When I took off it ran like it was bogging down for about 4 seconds then it sprang to life. next time no problem, 3rd time bogged again. next 3 moves no problem, last move did it again. I run the right fuels and additives. Plugs are 6mo.s old. Does it sound like time to change filters ? If so aren't there (3) to be changed, and what should it cost. (I'm no wrench)

  2. Member
    Join Date
    Jan 2006
    Location
    Ottawa, Ontario, Canada
    Posts
    1,350
    #2

    Re: Motor bogged today ? (LeeinAlabama)

    Yes change all 3 filters you're looking at about 140 for the filters from boats.net see how it performs after the filter change.

    Current: 2006 ~ 20i ~ 250 HPDI ~ T1-25p
    Previous: 2005 ~ ZX 225 ~ 250 HPDI Phase III - TXP 26p

  3. Member Vyper202's Avatar
    Join Date
    Jun 2004
    Location
    Phenix
    Posts
    2,100
    #3

    Re: Motor bogged today ? (LeeinAlabama)

    IM sent


    P&J FISHING ENTERPRISES
    \"HIGH PERFORMANCE FISHING\"

    "How fast do you want to go?"
    [I]Blazer 202 DC - 300 Hammer

  4. Member
    Join Date
    Jun 2009
    Location
    saltrock
    Posts
    49
    #4

    Re: Motor bogged today ? (LeeinAlabama)

    got the same problem on my 03 -250 hpdi someone told me it was the 02 sensor so cleaned it but still have the problem I didnt know about the filters so thats my next try thanks

  5. Member
    Join Date
    Jun 2004
    Location
    Birmingham, Alabama
    Posts
    1,000
    #5

    Re: Motor bogged today ? (Vyper202)

    Changed the filters and plugs. No problems since. Thanks for the replies guys !!!

Similar Threads

  1. Motor ran bad today
    By BARRY J in forum Mercury - 2.0/ 2.4/ 2.5 Liter High Performance
    Replies: 5
    Last Post: 01-15-2012, 07:58 PM
  2. Added a little pep to my motor today
    By elm creek in forum Texas Fishing
    Replies: 20
    Last Post: 09-23-2010, 07:40 AM
  3. Ran the new motor today.
    By JoshKeller in forum Evinrude/Johnson Motors
    Replies: 0
    Last Post: 10-13-2009, 02:59 PM
  4. MOTOR BLEW TODAY
    By 21ssextreme in forum Evinrude/Johnson Motors
    Replies: 37
    Last Post: 05-23-2006, 05:09 PM