Trim Sender Ground Wire

[FishinCustody]

Guys, forgive my ignorance, but where would the ground wire for the trim sender on a 2000 Johnson 200 hp carb be???

To be honest, I know little to nothing about about this engine, but I need to find that ground so my trim gauge will work...

Thanks in advance...

FC

[ChampioNman]

Hey Mike,
It goes on the bottom bolt of the sending unit, green wire. CM

[Bassmeister]

Dat's what I wuz gonna say!!! Mine has the green wire under the sender, some times with a powerhead change the wires in the plug won't match the wires on the plug on the midsection! I had that problem when I changed ph on mine! I switched the wires in one plug to correspond to the wires on the other and voila!! Check it out.