I need to replace my steering cables. Any tutorials to do so? Also an estimated price for good used ones?
Thanks
Mark.![]()
![]()
I need to replace my steering cables. Any tutorials to do so? Also an estimated price for good used ones?
Thanks
Mark.![]()
![]()
Practice CPR, \"Catch, Photo, and Release\".
It\'s the future of our sport!
http://downtownbassanglers.com
Do not even think about using used ones, Likely you will have to replace the whole steering unit because if it's a Teleflex unit they do not make the old cables anymore. I found Ebay to be the cheapest at around $339.00 plus shipping! $475.00 is list!!!!!
There is a fine line between \"FISHING\" and just standing in the boat going through the motions!!!![]()
Is it the dual rack system? If it is you can still get those cables, http://www.jamestowndistributors.com you will need your length when you order. Just disconnect at the tie bar and unbolt them from the helm. Pull them out from your console side. Tie a piece of 3/8" nylon rope into the eye of each cable so you can use it to pull the new cables back.
Thanks for the tip!
mark.![]()
![]()
Practice CPR, \"Catch, Photo, and Release\".
It\'s the future of our sport!
http://downtownbassanglers.com
I just bought and installed new dual rack cables from http://www.boatersland.com. They were by far the cheapest with some places twice that. I paid $88.00 a piece for two 14' rack and cable assemblies. They were the Teleflex SSC12414. You might want to look there before you buy.![]()
1996 Evinrude Vindicator 200
Mod# E200STLEDM
Ser# G 04135425
There is a place in Canada that still lists most of the older cables, it was the only place I could find new dual rack cables for a Javelin I had, needed new ones on there before I sold the rig. Their website is http://www.marinemanifold.com/.