Friend has 225 E-tec/He is switching from a Raker 2 prop to a Renegade
Does he need to change the thrust washer also?,
Friend has 225 E-tec/He is switching from a Raker 2 prop to a Renegade
Does he need to change the thrust washer also?,
Pro Staff / Indian Creek Lure Co.
RMR Industries/ BTS and KVD Line and Lure Conditioner
Skeeter21 i / Yamaha 250 HPDI VMAX
I assume the thrust washer on the Raker ll is the same as the old Raker so yes he would.
Dan Burnette - Marietta, GA
Triton 18TRX - 200 HO G2
No. But there is a splined washer that goes behind the gade and you are going to need a blowout ring.
99' 201 Pro Elite
08' Evinrude 225 HO
I have never needed a blow out ring for a gade.
Also on my engine, the thrust washer for a raker and a gade is the same. They told me that when I went to the dealer, and I didn't believe them, so I ordered it online, and it was the same washer.
_________________________________________
96 Javelin 379SE 96 Johnson 150 (J150ELEDB)
Mods: FS carbs, Ficht reed cages, boyesen reeds and
Baker Hot Heads.
Reply With Quote