I was wondering what it would take to install a set up on the back deck which would allow me to pull kids on tubes or even ski? I'm guessing it will take more than what I can handle as far as the install.
I was wondering what it would take to install a set up on the back deck which would allow me to pull kids on tubes or even ski? I'm guessing it will take more than what I can handle as far as the install.
http://www.nextag.com/Bass-Boa...-html
Here's some reviews for the same product at Overtons
http://www.overtons.com/modper...s=1s2
They are not very hard to install. Two holes needed to be drilled in the splash well for the pylons and the center post screws in the pedestal plate. Once the ski tow bar is installed each pylon leg will need to be screwed together. This evens all the weight on all the poles.
I didn't realize I would have to drill holes in the glass. My luck I would get a crack of some sort down the line. Something I should worry about or alternatives?
I would worry about cracks on any installation that involves this type of set up. The aft poles will put down pressure on the glass and this cyclic stress will eventually start cracks between the holes and propagate towards each other.
thanks for the help guys. I'm gonna put this one off for a while. Would rather not cause damage to my new to me bass boat.
Reply With Quote