Been following the posts here , with White Knuckles appearing to be the fastest Stroker out there , is there still more speed left in White Knuckles? 119+ is very impressive . last i heard Wayne Worthy had the worlds fastest stock Stroker at 115mph
Been following the posts here , with White Knuckles appearing to be the fastest Stroker out there , is there still more speed left in White Knuckles? 119+ is very impressive . last i heard Wayne Worthy had the worlds fastest stock Stroker at 115mph
Blair has the fastest production stroker at 118 and change!!!....White knuckles is not a production boat
Jason
Can anyone order a boat like Blairs? Was anything special done to it ? As to White Knuckles it is still a Stroker
Full Kevlar, lower seats, everything else is standard. The boat is lighter than the stock hull.
Mr. Chub always has the option of building others just like Nightmare........
Wayne has listed the speeds of the Yammy Strokers over on Fastbass, for your reading pleasure..............
Some REAL impressive numbers out there with Stroker hulls................
Soon there should be one that is faster then nightmare.
There is definitely more speed left in White Knuckles. The motor is still breaking inand has just over 4 hrs. That's the only way Brent knows how to break them in..... foot to the floor.A little tuning and we'll be back prop testing!
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by marty33 »</td></tr><tr><td class="quote">Can anyone order a boat like Blairs? Was anything special done to it ? As to White Knuckles it is still a Stroker</td></tr></table>
If ya got the money and time anyone can get one!!
Where as white knuckles may not be a producttion boat as of now, Chub's flats boat will be very close and may be what some of us are looking for.. As for speed, I drove white knuckles and belive there is more to come with no doubt.. I would have thought the boat weghed a lot les but on the same scales the same day my boat and white knuckles weighed very close to the same..
No doubt there is more speed to be seen from Stroker hulls in the near future!!
I guess I'm very Lucky then because both that 115 boat and White Knuckles reside in my garage
In regards to if White Knuckles, Nightmare, Tweety or Wayne's former boat are "stock boats" or "production boats" you decide, they are all Strokers
In regards to if White Knuckles has any more in her ????? What do you think based on what Todd said
Modified by esdbass at 7:26 PM 8/1/2010
Modified by esdbass at 7:27 PM 8/1/2010
They are all impressive
White Kunckles is still factory weight they just cleaned up the air flow alot
Eli Brent and Todd have done a great job and have got me wanting a cc
Kurt the CC would be great if they would put the pass. seat right behind the drives seat like the Ally 2002 or widen the console like the Ally 2003.
<br /><br />
Modified by scawdthedog at 6:28 PM 8/2/2010<br /><br />
Modified by scawdthedog at 7:13 PM 8/3/2010
Modified by scawdthedog at 7:14 PM 8/3/2010
Brent
2009 LCB 2005 300X
Been following the posts here , with White Knuckles appearing to be the fastest Stroker out there , is there still more speed left in White Knuckles? 119+ is very impressive . last i heard Wayne Worthy had the worlds fastest stock Stroker at 115mph
Marty:
White Knuckles is a very Consistent runner. The first day running with the new motor and 15" mid the sled cranked out 3 119+ passes, in slick, hot S. Florida conditions.
Markum Park (the top secret test area) is pretty protected from the wind and NO CURRENT. What I do like about this test ground is you are made to drive the boat straight and no boat wakes or other boats to worry about. BUT, you do have to watch out for miss gator and you do not want to hit a turtle.
We are able to stretch her out(for miles if needed) and take time doing it.
The boat gets to speed pretty fast too. Have not even ran anything smaller than a 33 but a 2 blade 35 rips your skull to 110 and we are encouraged to pursue further.
White Knuckles has more speed in her. The engine is still young, running rich and more prop work still to be done. With cooler weather we can pick up 200-300 RPMs and when the motor is loose, an easy 5-6 MPH gain is in the future. ElI, ToDD and I have a list of other things to improve overall performance even further. This is a fun project. I think Chub Bryant built this boat too, and yea the deck has been modified by Todd and Eli worked up north prior to this project(with Fountain) improving the bottom and all has contributed to the improved handling and speed.
Brent
2009 LCB 2005 300X
Brent: I guess you pretty much summed things up with that
Todd you got anything more to add?
Call it what you want production or not. EVERYONE in the game is ALWAYS looking for the edge. Based on what I have been reading I think the word PRODUCTION has been thrown around as a slap in the face to BET. Bottom line is its a Stroker and its fast. Extremely fast. Hats off the the south florida crew and that one dude sitting up there in the Mass area
Anyone can argue the point of Kurts, Blairs, Or White knuckles being a TRUE production boat on different levels. JMO
all 3 boats have taken the Stroker hull in a different direction. If anything this only helps Stroker as a whole. Basically Kurt, Blair and BET are doing the R&D for Stroker. Its up to Chub to take it were he will. a lot of money save din my opinion.
Modified by Hydrilla at 11:04 AM 8/4/2010
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Hydrilla »</td></tr><tr><td class="quote"> Based on what I have been reading I think the word PRODUCTION has been thrown around as a slap in the face to BET..<br /><br />
Modified by Hydrilla at 11:04 AM 8/4/2010</td></tr></table>
Now where do you come up with that????.....White knuckles was modified outside of the factory.....Kurt as well as Blairs boat were done AT the factory!!!!
Chub does NOT make a center console
Not knocking what they did at all
Jason
I think its great what everyone is doing with a Stroker it is just proves a Fact on how good of a boat they are. The hull was so far ahead of its time it was unreal
I just wish I would have had one in the late 80,s. The basic hull has not changed.
Todd and Eli & Brent have done a great job. and from what I have seen of the boat in the Blue room it is very similar to the BET creation. Simple fact is that White Knuckles
is a Stroker!!!! And for me I am proud of what they have done!!
It makes me want to do 1 thing...........Bust there azzI want to build something faster
Dang bar has been set high. and it is probably will be set higher
Be Safe guys and rember getting there is half the fun
Boyz I am commin
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by 1outlaw »</td></tr><tr><td class="quote">
Now where do you come up with that????.....White knuckles was modified outside of the factory.....Kurt as well as Blairs boat were done AT the factory!!!!
Chub does NOT make a center console
Not knocking what they did at all
I have heard multiple rumors on where or who Kurts boat was built by.If they are just rumors then so be it. We have also heard that Chub will never go with kurts pad design on another hull, Now it seems the pad is getting revamped to possibly reflect Kurts prototype pad. Once again, are these just rumors? Kurts boat was a left side steer. Any other left side steers built?
Blairs boat is a one off boat and the price reflects it. Can anyone go to Stroker and get the same boat. Probably.. However Blairs boat was done because Blair decided to spend his money how he sees fit. If it wasn't for Blair I would be willing to bet that "nightmare" would not have come into reality.
As far as the word production goes, Just look at your siggy. You posted it for one reason or another. I mean honestly is there any other reson to emphasize the word production. Funny how you are the one who also jumped on my post 1st.. Hmmmm
You all better look out now I think Kurt is gunnin for you! Sickum Kurt!
Reply With Quote
