Was gonna do some testing this weekend with a few props. I have a 97 Javelin 400SDC with a 200 Venom on a 9" Plate...the plate is ALL the way up, and I only have one more hole to go where the motor mounts on the plate itself. Right now prop is 5" below the pad...and raising the motor up to the top hole will only give me another 1/2 inch...Plate is mounted where is should be on the transom as the top of it is flush with bottom of the rail on transom. I think I need to be around 3.5 below the pad for the sweet spot, any suggestions??