Stratos trailer bearing sizes?

[Troy250]

I have a 1994 Stratos tandem trailer. Does anyone know the size of the rear bearing? I do know the rear seal is 2.5 inches outside diameter and the front bearing is 1 1/8 inside diameter. I didn't have the correct seal, so I didn't want to destroy it until I have the correct bearing to replace. I'm thinking it is 1 3/4 inches. Does that sound right? Does anyone have a part # or just correct size I would surely appreciate it...Boat is parked at lake and it stinks driving 100 miles with wrong parts......

[TightLip]

Not sure if you noticed, but there is a "wear sleeve" that fits over the axle where the seal runs. If they have been previously removed it will require a smaller inside diameter seal. There should be a number on the outside of the seal that can be matched to a new one. If you had a bearing tear up, it may have damaged the sleeve. The only sure way to know will be to remove it and see. There should be number on the bearing part too. Once you have the numbers, you will be in business. You may want to call C&O parts - I am sure they can give you the numbers

[Troy250]

Thanks for the input. Was able to find a kit at the local boat shop with the size I hope I need for both axles.....lol........ 1 1/8 x 1 1/16 sound about right....Will check that wear sleave now that you mention it....