Hot Foot Adj.

[hunter35745]

2017 Skeeter ZX 250, my motor is turning around 800 rpm with the boat in gear and no throttle, also I have lost speed and rpm, how do you set WOT and Idle either at motor and hot foot, the adjustment bolt that touches the pedal at idle has come loose, I am assuming this is a stop for idle, have not googled hot foot yet, please help if possible.

[bwp777]

I thought 800 was about right for idle but I don't have a 4 stroke

[Randy T]

Your motor is new, so the linkage at the throttle sensor most likely did not come loose, but something to look at. Motor in neutral idle should be 750ish on a properly working tach. CHeck hot foot bolt first.