Results 1 to 11 of 11
  1. #1
    Member
    Join Date
    Aug 2007
    Location
    Mesquite
    Posts
    2

    GT 150 starts but then dies

    My GT 150 is on a Procraft johnson boat and I am having trouble with it idle and just dying when cranked up, I also noticed that the fuel in the filter will go back down after it is pumped up with the primer bulb and the bulb does not stay hard. The carbs are getting fuel and oil misture and there is no sign of fuel leaks, I replaced the device that has the red lever on the driver side of the motor because the O ring was leaking before. I have changed plugs and wires but still the same thing. It will crank up but will die right away, like the motor is being shut off.

    Any suggestions what to look at next?

    Sorry about that..... The model number is J150STLCRD


    Modified by bpwildcat at 12:11 PM 8/6/2007

  2. Member
    Join Date
    Jul 2007
    Location
    Cincy
    Posts
    32
    #2

    Re: GT 150 starts but then dies (bpwildcat)

    fuel pumps? filter?

  3. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,164
    #3

    Re: GT 150 starts but then dies (bassboatman)

    Wow Gt/Xp range for a long time. How about reading Rule #1???

  4. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #4

    Re: GT 150 starts but then dies (bpwildcat)

    Welcome to the BBC.

    We will need your model number to better answer your question.


  5. Member
    Join Date
    Aug 2007
    Location
    Mesquite
    Posts
    2
    #5

    Re: GT 150 starts but then dies (RUSTY63)

    sorry about that , the Model number is J150STLCRD

  6. Member
    Join Date
    Jul 2007
    Location
    Cedar Hill
    Posts
    34
    #6
    Where did you find the model & serial #'s

  7. Member DoferGofer's Avatar
    Join Date
    Jun 2004
    Location
    Edgewood Maryland
    Posts
    1,807
    #7

    Re: (HDVROD100)

    His numbers are legal. His motor is a 1984 and like my 1985 there is not a Model Variation letter on the nomenclature tag.

    http://www.brokeboats.com/omcid.html

    Regards,



    If you can't run with the big dogs, just stay on the porch.

    Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011

    SST... 14 1/2" x 19" 45.0 mph.@4950
    Rebel 15 1/2" x 17" 45.1 mph.@5250
    Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
    Rebel 15 3/4" x 15" 44.2 mph.@5700-5750

  8. Member
    Join Date
    Jul 2007
    Location
    Cedar Hill
    Posts
    34
    #8

    Re: (DoferGofer)

    Not questioning his numbers, just wondering where to look for them on the motor. I have a 90' model & can't find any numbers I need to ask questions.

  9. Member
    Join Date
    Feb 2007
    Location
    Fredricksburg
    Posts
    19
    #9

    Re: (HDVROD100)

    If yours is like mine, turn your steering wheel hard right, and there is a number plate on the mounting bracket next to the top bolts.

    Hope this helps.

    -TH

  10. Member
    Join Date
    Jul 2007
    Location
    Cedar Hill
    Posts
    34
    #10
    Thanks alot!

  11. Member
    Join Date
    Aug 2007
    Location
    northcentral
    Posts
    14
    #11

    Re: GT 150 starts but then dies (bpwildcat)

    definately sounds like the anti-siphon valve at the tank output.

Similar Threads

  1. 1999 Johnson Ocean Pro 200 starts buts coughs a smoke cloud and dies.
    By thatdopedj in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 07-04-2011, 04:20 PM
  2. starts good idles good but dies above idle in water on trailer will rev ok
    By waynestmarie in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 04-30-2011, 12:35 PM
  3. '68 Johnson 20 HP- Starts then dies
    By mitchell301 in forum Evinrude/Johnson Motors
    Replies: 0
    Last Post: 12-27-2009, 02:59 PM
  4. 150 intruder starts hard and dies when put in gear
    By zebeanna in forum Evinrude/Johnson Motors
    Replies: 10
    Last Post: 08-17-2009, 07:19 AM
  5. 96' evinrude 150 starts and dies
    By Bass99Xpress in forum Evinrude/Johnson Motors
    Replies: 7
    Last Post: 06-11-2009, 04:59 PM