Any ideas why recirculate lights flash when pushed on 2007 20i?

[SkeeterjeffOK]

Fished a "cold" winter tournament this weekend. Filled starboard livewell when the 1st fish (okay, only fish) was caught, then hit the recirculate button and it did not come on, only the red light started flashing - off and on. We filled the port livewell and the very same thing happened.

Now, both lights are still flashing, even when the power is turned off.

I called our Skeeter service department and they did not know what was going on and said to bring it in to them after the boat show is over. Hoping someone on the board may have encountered this problem before. Thanks.

SkeeterjeffOK

[Neilslure]

Maybe pumps froze up?

[Obiggen]

yes, you can try unhooking your battery for a few minutes an see if they will reset,on their on. An if not the problem might be in the board .

[Tin Man Dan]

yes had this happen to mine, it was working and then started blinking. Just undo the cables from battery this will reset the livewells. It worked for me no more problems

[stratman201]

Same thing happened to me. For me I had to change out the control center. I'm talking about the buttons that control the livewells on the left side of the steering wheel. All of these buttons are one part and Skeeter replaced it.
skip