If you're getting your boat ready for this season......check all of your bolts and screws to make sure they are tight.

I pulled my boat out yesterday and started through my normal spring maintenance routine. Check jack plate and motor mount bolts, check trailer wheel bolts, check tire air pressure, vinyl protect on the seats, BBS on the glass, lower unit oil, check batteries, check oil, grease the trailer jack, grease motor fittings and tighten all bolts and screws.

For Christmas I got a new set of Gearwrench ratcheting wrenches from Sears and man did I give them a work out. I think almost every bolt and screw on the entire trailer, trolling motor and boat (except for the cleats) needed snugged up.



Modified by Rangerhgm at 9:36 AM 3/15/2012