I have looked my boat over and can not find the dang thing!!! Any suggestions?? I am thinking about putting a new motor on the butt. Currently run a 97 Intruder..
Don't want to go over the rating as I fish tourneys a lot now...
Any help, advise OR glasses appreciated....
Jim
I think that year was only rated for a 150 H.P.
20XRD
my 97 int is a 200
i would throw caution to the wind and just put a 250 on it
Replacing my 150 with a newer 150 won't hurt my feelings to bad
I will get to save a few $$$$... I need to get some info on set-up as I can only get about 62mph at WOT. I am running a 24" trophy right now. Not sure about the jack plate (manual) height... Seems to me it need to go up a bit.. Looks like it is about 3-4" up on the plate.. Any set-up advise appreciated as well..
Jim
Jim........give us the propshaft to pad measurement........
As Al said, we need your propshft highth and the length of your J/P won't hurt to know.......Trashy, Steve's Outlaw runs good, so listen to him.
20XRD
Might need to call them as I don't find it!!! I'll do some measuring and report back...
Went and pre-fished a lake in Tallahassee tonight and 5 best weighed over 23lbs... Biggest was 7.9, with a 7.2 also... My arms are SORE!!!Hope my fish hold until next weekend!!!
jim
What's the lake name?
20XRD
Thank you!
20XRD
Reply With Quote