Results 1 to 11 of 11
  1. #1
    Notorious P.I.G FSHN ROD's Avatar
    Join Date
    Mar 2006
    Location
    Hillsboro Ohio
    Posts
    2,597

    What length tm shaft on a 201 ?

    I have had 2 motorguides (given to me) that even with the motor lowered all the way would come out of the water with little waves.
    My wife is byin me a new minkota for my birthday and I want one that I can fish rough water with but also when in shallow water not be breakin baits on the head of my tm cause its up to high.
    Thanks

    RUMORS ARE CARRIED BY HATERS , SPREAD BY FOOLS , AND ACCEPTED BY IDIOTS !

  2. Member Short Strike's Avatar
    Join Date
    May 2008
    Location
    LaCrosse Wisconsin
    Posts
    207
    #2

    Re: What length tm shaft on a 201 ? (FSHN ROD)

    I dont know the lengths for motorguide, but I have a minn kota 60" that I felt was way too long. Installed the 52" shaft and am happy. Fished 2-3ft waves with no issues. Also, the longer the shaft the more positioning considerations need to be made so that shaft is not hanging outside the hull when stowed. Our decks on the 201 are not exactly roomy.

    1992 ChamP 201 and 225 Opti.

  3. Notorious P.I.G FSHN ROD's Avatar
    Join Date
    Mar 2006
    Location
    Hillsboro Ohio
    Posts
    2,597
    #3

    Re: What length tm shaft on a 201 ? (~NarrowMinded~)

    I know, I am having a cousin water jet cut me a 1/4 in piece of aluminum plate to mount under the bow and a piece of the same except polished to mount on the top to add strength to mine. It flexes a good bit now with the power of the bigger tm's.

    RUMORS ARE CARRIED BY HATERS , SPREAD BY FOOLS , AND ACCEPTED BY IDIOTS !

  4. Champion Boats Moderator Tx Champ's Avatar
    Join Date
    Jun 2004
    Location
    Abilene, TX
    Posts
    21,123
    #4

    Re: What length tm shaft on a 201 ? (FSHN ROD)

    I had a 52" on my 201 ...

  5. Member sodaksker's Avatar
    Join Date
    Aug 2010
    Location
    Dakota Dunes, SD
    Posts
    1,102
    #5

    Re: What length tm shaft on a 201 ? (Tx Champ)

    My 186 had a 42" went to 52". It works but I hit it while casting atleast once per day. Wish I would have went with a 48"
    "heard it in a love song.........can't be wrong"

  6. Champion Boats Moderator Lea's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, VA
    Posts
    48,853
    #6

    Re: What length tm shaft on a 201 ? (FSHN ROD)

    52" on my 198. Zero issues with hitting it and stays in the water in the rough wakes and all...

  7. Member
    Join Date
    May 2007
    Location
    Houston
    Posts
    2,129
    #7

    Re: What length tm shaft on a 201 ? (Lea)

    50-52 inches

  8. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,138
    #8

    Re: What length tm shaft on a 201 ? (kris_tx)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by kris_tx &raquo;</td></tr><tr><td class="quote">50-52 inches</td></tr></table>

    That is fine. If it comes out of the H20 with that, you need to move to a new spot.

  9. Champion Boats Moderator Tx Champ's Avatar
    Join Date
    Jun 2004
    Location
    Abilene, TX
    Posts
    21,123
    #9

    Re: What length tm shaft on a 201 ? (ChampioNman)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by ChampioNman &raquo;</td></tr><tr><td class="quote"> That is fine. If it comes out of the H20 with that, you need to move to a new spot. </td></tr></table>

    Oh, I think that day we came out of Harvey Creek at Big Sam with that 40+ north wind, I bet we coulda bounced that 52" out of the water then ... So much for the dry Champion ride that day

  10. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,138
    #10

    Re: What length tm shaft on a 201 ? (Tx Champ)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Tx Champ &raquo;</td></tr><tr><td class="quote">

    Oh, I think that day we came out of Harvey Creek at Big Sam with that 40+ north wind, I bet we coulda bounced that 52" out of the water then ... So much for the dry Champion ride that day </td></tr></table>

    Could have been aboard a destroyer that day and got wet! BASTAGE! 3 showers that day. All that and the spinner bait lady!

  11. Champion Boats Moderator Tx Champ's Avatar
    Join Date
    Jun 2004
    Location
    Abilene, TX
    Posts
    21,123
    #11

    Re: What length tm shaft on a 201 ? (ChampioNman)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by ChampioNman &raquo;</td></tr><tr><td class="quote"> Could have been aboard a destroyer that day and got wet! BASTAGE! 3 showers that day. All that and the spinner bait lady! </td></tr></table>

    Good times

Similar Threads

  1. Shaft length?
    By marinesashore in forum Novice Boaters Forum
    Replies: 8
    Last Post: 10-06-2010, 05:04 PM
  2. shaft length
    By Jasonrs in forum Champion Boats
    Replies: 3
    Last Post: 04-25-2010, 12:14 PM
  3. shaft length
    By skeeter1984sf in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 03-29-2008, 08:24 PM
  4. Shaft Length of L/U
    By kevinb123 in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 01-14-2008, 02:24 AM