Thread: carbs

Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Aug 2004
    Location
    Lehighton, PA
    Posts
    347

    carbs

    are the carbs for an 89gt 200 and the 92gt 200 the same? the only difference i noticed on them is the plate on the side of the carb on the 89 has only 2 screws and the ones of the 92 have 4 screws.

    Thanks,

    Jim

  2. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #2

    Re: carbs (89basscat)

    Jim, are you having a problem with you carbs?

  3. Member
    Join Date
    Aug 2004
    Location
    Lehighton, PA
    Posts
    347
    #3

    Re: carbs (RUSTY63)

    well i dont know for sure.. i think so... i bought a set of carbs of a 92 gt 200 sothat i could rebuild the 92 carbs while on the bench and then rip the 89 carbs off and install the 92 carbs so that i dont have much downtime... the brp site was down when i was trying to find the part numbers... the only difference i saw in the two was the side plate had 4 screws on the 92 and 2 screws on the 89.


    Thanks,
    Jim

Similar Threads

  1. rejetting carbs
    By stillina99ho in forum Evinrude/Johnson Motors
    Replies: 0
    Last Post: 07-10-2011, 08:11 PM
  2. Looking for carbs for an old Johnson
    By Les Young in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 02-28-2011, 03:23 PM
  3. wtb pro v 200 carbs
    By lunker0477 in forum Yamaha Motors
    Replies: 0
    Last Post: 06-27-2009, 05:39 AM
  4. OMC Carbs for 200
    By lkhartwl in forum Evinrude/Johnson Motors
    Replies: 0
    Last Post: 02-25-2007, 08:48 AM
  5. Rusty. want some carbs???
    By rayz379 in forum Evinrude/Johnson Motors
    Replies: 12
    Last Post: 03-06-2005, 04:39 PM