My fuel gauge is faulty. At empty it reads approx 1/4 and at full it reads approx 3/4 full, does this sound like a problem with the sender or gauge? When off, the gauge does drop all the way to E. Is there a way of testing either the sender or gauge?

On my livewell, it worked great this past weekend! Brought two fish back to the weigh-in safe, sound, and healthy How hard is it to install a pumpout on this boat? Is it feasible to do it with a t-connector and a check valve so that I can use my existing bilge pump thru-hill fitting? I don't see much purpose for a pumpout EXCEPT my livewells are so small it's tough to get a weigh in bag in there to use good water so I had to dip into crummy marina water this past weekend. Also my livewell open/close valve seems to be leaking a little bit, it wasn't enough to cause us any serious problems but with the valve closed the livewell will eventually fill with water. Where can I get replacement valves and where are they at on the boat?

Thanks