Results 1 to 9 of 9
  1. #1
    Member
    Join Date
    Mar 2010
    Location
    Riverside County
    Posts
    3

    Need help finding Hydro switch plate

    Hello All,

    New to the forum. Great stuff so far. I need some help finding a "Hydro" switch cover for my 2007 Champion 206. It is a rocker type switch that has a small red lense on the top. It is three position; auto-off-manual. I have attached a picture of the aerator switch and the missing hydro. It is the same as the aerator but says "HYDRO". The switch still works fine so I just need the cover.

    Called my local dealer where I bought the boat from but they tell me they cannot get any parts from Champion right now (scary!).

    Thanks!

  2. Member R1Peacock's Avatar
    Join Date
    Mar 2007
    Location
    Westminster, MD
    Posts
    438
    #2

    Re: Need help finding Hydro switch plate (fishinfyrman)

    Contact C&O Marine. The below link shows some of the switches they have listed on their website.

    http://www.candomarineparts.com/Switches.html

    Rich
    Westminster, Maryland
    Champion 198 Elite DC / Yamaha VMax

  3. Member
    Join Date
    Mar 2010
    Location
    Riverside County
    Posts
    3
    #3

    Re: Need help finding Hydro switch plate

    Thanks for the quick reply Rich.

    I checked out C&O. They have quite a selection but none that are the same switch. I was hoping to find an OEM switch. The dealer has yet to contact me on who the switch is made by and there are no markings on the switch itself.

  4. Champion Boats Moderator Lea's Avatar
    Join Date
    Jul 2004
    Location
    Franklin, VA
    Posts
    48,853
    #4

    Re: Need help finding Hydro switch plate (fishinfyrman)

    Hope a dealer can help. I had to replace one and my dealer had the replacement....

  5. Champion Boats Moderator Tx Champ's Avatar
    Join Date
    Jun 2004
    Location
    Abilene, TX
    Posts
    21,099
    #5

    Re: Need help finding Hydro switch plate (fishinfyrman)

    If you did not call or e-mail C&O Marine Parts, do so. They have more than what is on their site.

    You can get the mfg and part number off the side of the switch, but that will not get you the labeling you want/need on the rocker. That will be proprietary to Champion unless some other boat mfg used the same label for the same switch. Then it may not be in the same position as what you had. If this is broken and you still have the rocker, I would save it and get a switch that performs the function and swap out the rockers.

  6. Member
    Join Date
    Aug 2004
    Location
    Headland, AL
    Posts
    1,657
    #6

    Re: Need help finding Hydro switch plate (fishinfyrman)

    Your switches are made by Carling Tech. If C&O doesn't have them, they maybe able to help. I want to replace my switch actuators also and am searching for someone who carries them.
    1999 Champion 203
    2000 Yamaha OX66 225

  7. Member
    Join Date
    May 2006
    Location
    Lumberton
    Posts
    1,261
    #7

    Re: Need help finding Hydro switch plate (sarmst100)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sarmst100 &raquo;</TD></TR><TR><TD CLASS="quote">Your switches are made by Carling Tech. If C&O doesn't have them, they maybe able to help. I want to replace my switch actuators also and am searching for someone who carries them. </TD></TR></TABLE>


    They will sell you the switches but if you want them with the wording you have to go through the boat manufacturer I'm currently looking for a pump out cover for my 206 so if anyone finds one please let me know!

    http://www.bassfury.com/index.html


    "The Few, The Proud, The Champion Owners"

  8. Member
    Join Date
    Mar 2010
    Location
    Riverside County
    Posts
    3
    #8

    Re: Need help finding Hydro switch plate (fishinfyrman)

    Thanks for all the suggestions! I will give C&O a call tommorow and see what they can do.

  9. BBC SPONSOR
    Join Date
    Oct 2007
    Location
    Tennessee
    Posts
    1,276
    #9

    Re: Need help finding Hydro switch plate (fishinfyrman)

    I've looked thru quite a few cap here and have not found one that says "Hydro".
    I have several for Areator and Bilge and I found a blank one but it has a different style of light on it.


Similar Threads

  1. Need help finding the correct Key Switch Harness
    By 519DVX in forum Mercury Motors
    Replies: 5
    Last Post: 01-24-2012, 01:34 AM
  2. Help with Hydro Pump and Rocker Switch
    By R1Peacock in forum Champion Boats
    Replies: 1
    Last Post: 05-29-2010, 03:55 PM
  3. best hydro plate on BULLET
    By 2500 in forum Bullet Boats
    Replies: 6
    Last Post: 04-17-2009, 07:20 PM
  4. 8" Detwiler Hydro Plate
    By CGWright in forum Skeeter Boats
    Replies: 13
    Last Post: 10-31-2006, 07:05 PM