202 trying to get it stable need info

[bailiff78]

had 10'' plate just got 15'' rapidjack puting it on this week i have 202 with hpdi 300 with stock 27 pitch prop . what prop should i run with this set up ? wont to lose some of the chinewalking.thanks for the help

[Rebel1]

Prop depends on set up. I run a 29 & 30 ASX and a 29 Hydromotive on mine.

[Alan]

I run a 28 TXP b&b with pvs holes by Mark. It handles much better than the 27 Yamaha I had. Also I don't think the 27 will be enough prop. I was hitting the limiter with it on my setup. I run a pretty heavy load and the 28 TXP is a good all around prop for my setup. I am running 1/2" below the pad.

[bailiff78]

is it a 4 blade are 3 blade and were can i get that prop

[Rebel1]

Contact GE Blazer here on the boards and he will hook you up.

[Fear-This]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bailiff78 &raquo;</TD></TR><TR><TD CLASS="quote">had 10'' plate just got 15'' rapidjack puting it on this week i have 202 with hpdi 300 with stock 27 pitch prop . what prop should i run with this set up ? wont to lose some of the chinewalking.thanks for the help </TD></TR></TABLE>...should came with a 29 t1 get it B&B BY MARK I think VIPER getting around 89 gps 29 T1 it's a strong Prop if work. you are not running fast if it don't chime a little.

[Alan]

It is a 3 blade. Like Jason said GE can hook you up.

[Vyper202]

Im running a 27T1 for a extra heavy load and a 29T1 and a 30 ASX for light to moderate loads. The 27 runs at even with the pad, the 29 at 1/4 above and the 30 at 1/2 above. Best Iv seen so far is 89.3 with the 30, single, full load and fuel.
Its chines a little, but very controllable, can almost drive with one hand.

[21XDC]

I have a very nice 28 TXP that Mark did for sale... Let me know if you want it.

[fishin fever]

mike is it a 4 blade??

[21XDC]

No... That would be a TXP-OT4

[bluegambler]

29t1 B&B by mark