Johnson J90 2000


I think I spun the hub today, after a good time with the local Redfish population.

On the way back to the ramp, doing 25mph, sudden surge in RPM, no forward speed. Hobbled back to the ramp, 2 miles, at 4 mph.

Ok, so back home. Pulled cotter pin, turned nut loose with fingers, but the prop will not come off. Stuck, I guess. If I can get it off, I can drop at local tackle shop where there is a 2x per week drop and pick-up for spun hub repairs.

The prop is a Michigan Wheel Rapture. I believe its a 13 1/4 x 17.

How do I get this thing off !!!!!!!!!!!


Ok, the answer was a "BIG HAMMER" and two big guys pulling at the same time the hammer was employed. Spun for sure. On its way to the prop shop.

DR


Modified by rrunkel at 8:19 PM 9/6/2006


Modified by rrunkel at 8:20 PM 9/6/2006


Modified by rrunkel at 8:43 PM 9/6/2006


Modified by rrunkel at 9:52 AM 9/7/2006


Modified by rrunkel at 12:30 PM 9/12/2006