Low Oil Sensor Part Number....PLEASE

[BigSmallie II]

1999 Johnson 225 HO Carb J225HPLEEN

I have looked all over the parts catalog link above......and cannot find the low oil sensor that I need to replace.

My low oil horn goes off EVERY time I start the motor. My fishing partner is about to kill me if I don't fix this before the next tournament. Any assistance in the correct part number and what the job entails would be appreciated.

Thanks in advance!

[BigSmallie II]

Bump

[mead]

It's not just the low oil sensor. You should replace the complete pickup assy that is in the oil tank. Unless the float is hanging up.

[BigSmallie II]

That's my problem.......I pulled the assembly part way out.....and can't tell which part is the float??? I'm assuming that it's the piece that runs between the 2 rods...........but I'm not sure. I tried to move It...but it didn't move.......it was at the bottom between the 2 rods???

Could I also unplug this low oil sensor???

[ChampioNman]

You need part number 0176362. You can unplug the sensor. Remember when you replace the assembly to re-prime the VRO as the new pickup will come with the hose attached. The older pickups used to move up and down the rods but the new style doesn't. CM

[BigSmallie II]

Thanks CM...........I just purchased a new oil tank with all attachments. The new one has what looks like a separate float.....like you said.....the new ones don't have the float in between the rods.

Thanks again