Matt, Wayne or anyone else that may know. I plan giving my 95' ProV 175 all the HydroTec goodies over the winter. When I purchased the boat and motor, the orginal owner removed the oil injection and he and the previous owner just mixed the fuel. Can I mod this motor and keep mixing the motor at 50:1 or should richen up the fuel/oil mix a bit? I'm assuming I should richen it a bit due to the increased AFR that will be introduced after the mods but got to thinking that the older 200+ motors use 50:1 when mixed. Better to ask the experts on mods than blow one up.

I plan on installing everything; big bore carbs, moded intake, heads, tuner, engine mounts, flywheel, reeds, reed block, and light weight cowling.




Modified by The Next KVD at 8:16 PM 10/25/2010