what kind of power can be expected out of phase kits 2 and 3 on an 04 250hpdi? would there be any benefit to installing a 300 computer? thanks
what kind of power can be expected out of phase kits 2 and 3 on an 04 250hpdi? would there be any benefit to installing a 300 computer? thanks
Phase II - 20 hp
Phase III - 50 hp
The 300 ecu will help if installed after Phase Kit, the 300 ecu bu itself will have no effect.
thanks for the quick response. is there much noise difference with the tuner over stock?
Not really, just sounds a little throaty. But if you want more noise, you can remove the muffler.
what kind of power differences do you see between the 250 and 300? where is the additional power made on the series 2 motors?
Not to be sarcastic but it is now about 50 hp. It didn't used to be that much. When the 300 first came out, it didn't quite make 300hp at the crankshaft. So the difference wasn't that much.
The new HPDI's (Series 2) are about 20hp more than the previous edition.....the biggest change hey made was re-mapping the ecu.
Did that answer your question? Sorry, its earrrrrrrrly.![]()
p.s. My name is Mat Worthy and I also work for Hydro Tec (as you can tell from my signature) and I will be on here as well helping out my dad.
ports are slightly different 250 to the 300.....
mat, thats what i was referring to. everything i have read shows the 300 around 275hp, and yall dynoed the 250 for bwb 3 years ago at high 260s, which was a pre-series 2 motor. thats also why i asked about installing an updated 300 computer, hoping to gain power from the remapped tuning along with it being tuned for 50hp more. essentially the 300 has different porting, tuning, and cooling system? would there be nothing gained from worked 300 heads? im sorry for all the questions, but a friend has some 300 stuff laying around, and i would like to determine what would be worth while to install when the phase kit goes on. thanks
The 300 heads will show a little difference but really need to be modified. The 300 ecu is a good ideaafter some mods
I heard you could change a chip in a 225 HPDI with a chip in a 250 HPDI and make the 225 a 250. Is this true??
I don't know where we are, but we are making darn good time.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RyanB »</TD></TR><TR><TD CLASS="quote">I heard you could change a chip in a 225 HPDI with a chip in a 250 HPDI and make the 225 a 250. Is this true??</TD></TR></TABLE>
Chip?
No, there is no chip that can be changed. I wish there was...then we could put one in it without a rev-limiter!![]()
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mat_HT »</TD></TR><TR><TD CLASS="quote">No, there is no chip that can be changed. I wish there was...then we could put one in it without a rev-limiter!![]()
</TD></TR></TABLE>
Thats what I thought. I was very skeptical when I heard that. I'll be able to sleep tonight![]()
I don't know where we are, but we are making darn good time.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Wayne Worthy »</TD></TR><TR><TD CLASS="quote">Phase II - 20 hp
Phase III - 50 hp
The 300 ecu will help if installed after Phase Kit, the 300 ecu bu itself will have no effect.</TD></TR></TABLE>
how much would phase II or III kits cost a man? (ballpark) 06 250 HPDI 3.3
Ill keep my freedom, my guns, my money, you can keep the \"change\"![]()
will all the mods void warrenty? Is there little things i can do thay wont like spacers ,etc
Ill keep my freedom, my guns, my money, you can keep the \"change\"![]()
HT 3510 Phase II ($450 deposit for heads) 1,396.00
HT 3520 Phase III ($450 deposit for heads) 2,839.00
(Throttle body & reed blocks must be sent in advance)
I don't understand you 2nd question? The warranty can not be voided by can be affected by Phase Kits. Whoever does install is responsible for warranty of installation of kit.
i have a 2007 skeeter 20 i w/06 250 HPDI, two people,gear,1/4 tank, All i can get is 74.1 @5800 w/a 25t, 2.5 above pad,any idea what mph gain i should expect from those kits
Ill keep my freedom, my guns, my money, you can keep the \"change\"![]()
Those are awful good numbers...........I figure that is about 5% prop slip?? Is that GPS speed??