As I was working on a few things on the boat today I realized for the first time that when the hot foot is floored the throttle on the motor still has a little ways to go before it hits the stop on the throttle cam. Should the throtttle be hitting the little throttle stop pin when the hot foot is at its stopper? I am only getting 5400-5600 RPMS trimmed all the way out with a 25 T1 prop in cool weather and motor raised to right at 2.5" on the plates , 20 PSI H20 pressure. Is there an easy way to adjust the throttle to achieve WOT? I only get 5000 RPMS with the motor trimmed all teh way down.


Modified by TexasCub at 3:09 PM 1/17/2012