Hi guys I just recieved a 15 1/4" 25P T1 Vmax Series 3 blade prop from a friend but when its on the gearcase the blades will hit the trim tab. Thankfully I looked at this before I fired up the motor and put it in gear. Is there another trim tab that I can try or is the diameter of the prop just too big?? My friend was running the prop on a 200 HPDI so I thought that it would fit. The prop that is currently on the boat is a 13 3/4" 26P Turbo 4 blade that fits and passes the trim tab with lots of clearance.