close
Modified by irbya at 5:05 PM 3/12/2011
close
Modified by irbya at 5:05 PM 3/12/2011
Very simple, disconnect the battery and unscrew four bolts holding the fuel rail. Pull and gently pry away the rail from intake. Some fuel will spill! DonÂt disconnect any fuel lines from rail just slide the rail of to one side. Injectors harness has a small spring clip holding the connector. Push ends of the spring clip over the side of the connector. Remove big o-rings/grommets from intake or the injectors. Pull injectors from fuel rail. 15min max. Use red lock tite when reinstalling the fuel rail.
Had my injectors cleaned by Brucato 4 years ago and installed a 10 micron filter in the fuel line. No problems since!
Reply With Quote
