SPARK PLUG FOR 2006 250 HPDI

[JTD]

I ORDERED A NEW SET OF NGK BKR6EKU PLUGS FOR MY 250 HPDI I HAVE A STUPID QUESTION. DO YOU NEED TO SET THE GAP ON THESE PLUGS WHEN THEY ARE NEW? THEY HAVE DUAL ELECTRODES IF SO WHAT IS THE GAP. HOW MUCH DO YOU TORQUE THEM AT WHEN YOU INSTALL THEM?

[rangerguy]

Gap is .059 to .063 measured from each electrode to side of tip. Torque at 18.4 foot lbs.

PS--Take you Capital Letter Lock off, your post is hard to read and on the Net it means you are yelling at a person.

[JTD]

Thanks for both of the tips