I am putting a 250 sho on a 202 flat top blazer. What pitch prop should i run? Another thing i just read that you can put plugs in the props with vents does this sound right? I just gave a 27 pitch vmax series 2 prop away because i didnt think i could use it because of the vent holes
I have always heard ventless for this engine. Waiting to see other responses.
A plugged Fury is working better then the Ventless Vmax Prop so far. More test are being done. I am evaluating three props below.
Fury prop
Tempest Plus prop
Ventless Vmax prop
I run my 24p fury with the plugs out. Would it be better if I plugged them.
So far the 26 Fury has ran the best on my 250 SHO BC Puma FTD
27 Tempest Plus is a close second
I will sell my 27 t1 Yam prop to the highest bidder.
My boat likes the PVS holes plugged.
Modified by Hot Rod Johnson at 10:18 PM 7/26/2010
Would it cavitate with the plugs out. Mine doesn't cav with the plugs out, I will give it a try with them plugged. If it gets out of the hole even better I will be very happy.
Mine cavitated with the larger holed plugs. When I plugged them completely it stopped the cavitation unless I had the jack plate up too high and it didn't matter.
I guess please keep me informed so i dont buy all kinds of props. I talked to a guy at blazer and he said they are running better with vented props. The t1 and the fury were the ones he mentioned.
I'm running a T1 25p that Mark Croxton B&B. On the 721 Phoenix, top speed at 76.1, average speed around 74. Hole shot is excellent. I've purchased another T1 25p prop and had Mark re-pitch to a T1 26p. Hoping that will be the happy medium between a 25 for hole shot, and 27 for top end. Have not ran it yet. Will see how it works on Guntersville week of the 10th. Besides 2 Talons on the tail and a 36v TM system on the nose; I carry the kitchen sink with me, so pleased with the 74, but!!!!!!.
I have ran a Brovo 1 XS on my SHO with no cavitation problems. It has 4 1 inch holes. 26 pitch.
I tried a fury and didn't like it on my boat at all
Reply With Quote