Hello, I purchase a cable for my 300. 120-37 The box said for HPDI 300 VZ, this is my motor. however the plugs will not match, I have a gray and a white plug. I did not check till I was ready to hook them up. Well no match, is there an adapture to make these plugs. I can find no listing. I see some connectors are red and some are black. How ever they still go to the 2000 system, so the say. Can some one help me. thanks Jere.
Can you post a pic of the connector end of the cable?
2008 Z520/Yamaha 250
Looks like this
It is by the number 3 cylinder.
http://i116.photobucket.com/al...6.jpg
Yes I found that plug,However they woun't make up. I can't post a picture, do I have the correct cable. 120-37. Do you pull the blue plugs out of the motor plug befor make up? My boat is outside and they are calling for 6to8 ins.of snow starting tonight, so I will be on hold for a couple of days. Thanks Jere
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sawbuck »</TD></TR><TR><TD CLASS="quote">Yes I found that plug,However they woun't make up. I can't post a picture, do I have the correct cable. 120-37. Do you pull the blue plugs out of the motor plug befor make up? My boat is outside and they are calling for 6to8 ins.of snow starting tonight, so I will be on hold for a couple of days. Thanks Jere</TD></TR></TABLE>
Yes, you need to pull those blue plugs out. Is this the cable you purchased:
http://www.katerno.com/detail.php?s=71045
2008 Z520/Yamaha 250
THANKS FOR ALL THE IMFORMATION. I WISH SOME ONE HAD SAID SEPRATE THE MOTOR PLUG AND THEN CONNECT.I WENT OUT TO DAY AND TOOK A SECOUNT LOOK AND THIS IS WHAT I FOUND. I HAD NOT SEEN THIS BEFOR. THANGS FOR EVERTHING JERE
Reply With Quote
