I have a 2000 225 pro v. I would like to know where to check the prower trim fluid level. and what kind of fluid do i us please help
I have a 2000 225 pro v. I would like to know where to check the prower trim fluid level. and what kind of fluid do i us please help
Remove the cap with a phillips head screwdriver, and do it slowly. Add fluid until it's level with the hole, then put the cap back on.
![]()
thanks that makes it easy. what is the best fluid to use
Just a reminder as a safety precaution make sure you put down the motor supports when the motor is trimmed up.
Current: 2006 ~ 20i ~ 250 HPDI ~ T1-25p
Previous: 2005 ~ ZX 225 ~ 250 HPDI Phase III - TXP 26p
Yamaha power trim & tilt fluid or ATF (DEXRON II).![]()
Use the link pinned at the top of this page to view a manual. Chapter 4, page 18 will give you directions.
While you have the engine up, don't forget to add a dab of marine grease to the ends of the trim rods.