Plugs for 1990 ProV 150

[PhilG]

Currently have 6 Denso W24FS-U in the motor. I need to change them out. Could someone recommend the plug and the gap?
Thanks.

Phil

[Reata210]

NGK BR8HS-10 I would go to the NGK site and put in your model # to be sure. You can also call the dealer.

This info is also on a sticker under the cowl. The stick her the plug number as well as gap info.

[PhilG]

Thanks . .I didnt see anyting under the cowling . .but I will go look again!

[JUST-IN-TIME]

sparkplugs.com is the best place for plugs

[lakefolk]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Reata210 &raquo;</TD></TR><TR><TD CLASS="quote">NGK BR8HS-10 I would go to the NGK site and put in your model # to be sure. You can also call the dealer.

This info is also on a sticker under the cowl. The stick her the plug number as well as gap info.
</TD></TR></TABLE>

That should be the one, my 1991 manual calls for em.

[PhilG]

thanks for the info . .you wouldn't want to sell a xerox copy of your manual by chance? mine is a 90 but it should be close enough and give me "something".

[basshole45]

ngk b8hs-10 gap is 1.0 mm or 0.004in

[BuzzB8]

0.004???

The "10" means that they are factory-gapped at 1mm (or about 0.037). No need to gap a "10".