Anybody tried Fury prop on a 'Hammer?

[utfisherman]

Has anybody run a Mercury Fury prop on a Yamaha? I know most Yamaha's like large diameter props like the T1, but many of the black motor guys are getting good results with the Fury. Any results here?

[ShaftDilbert]

On my rig the Fury IS the very best prop i have tried. Results from reading on this site seem to vary quite a bit, but for me it is fantastic. Previous to the Fury the Trophy (B&B) was the best for me, even outrunning B&B Tempests. I have run: Yam T, Tempests, TXP's both 3 blade and 4, TRO4's, VMX and some others, all both stock and B&B.

As with all props there is no perfect prop for all rigs, just have to try it and see how it works on your particular combo.

25P Fury, 08 Series II 225, 07 Legend Alpha series 199 DCX..

[utfisherman]

Only one guy has tried this so far?

[fastlife]

I have a 26P Fury on my 01 ZX225 Skeeter with 225 VMax and it is definitely the best prop that I have ran so far for my rig. The holeshot was by far better for me than any other prop that I had and the top end is also better as well. Overall, I am certainly glad that I purchased one. Last week in 90+ degree temps and tons of humidity here in Georgia, I had it up to 73.2 GPS with full tanks of fuel, livewells empty, myself (215 lbs) and all of my fishing gear (a lot) at 5800 rpm's.

[Mark21SX]

Agreed.... I have a (heavy) Champ 21SX with a 300Vmax. The 25P Furythat I demo'd out performed my 25P T1, 26 Trophy, and 25P Tempest. My RPM's peaked at about 6100 so I orderd a 26P Fury. just got it in but haven't ran it yet. I'm hoping for about 5900 RPM's. Thanks to Hurricane Ike, I probably wont be able to get out for a few days to get it wet. I'll post my results.

[PolarKraft195]

[TXSERPENT]

are the hubs the same from yamaha to mercury

[craigs06]

yes, except fat shaft merc