speedo hole

[thorn]

is the speedo hole on a 250 in the nose cone is a small drill bit the best way to clean out kinda scared to do that please help thanks in advance

[BuzzB8]

Yes, it's one of the better ways. Please be sure to only turn it by hand (NO DRILLS). Use just a slight amount of pressure and twist. It will slowly chew up the debris and clear the plug. It may take a little time and your fingers may get tired, but it works.

[thorn]

thanks

[lost buckaroo]

go to your local welding supply shop and they will have a small bit cleaner that is full of micro drill bits. the larger of the bits will work just right.