Results 1 to 2 of 2
  1. #1
    Member 1quik's Avatar
    Join Date
    Apr 2009
    Location
    Lincoln, AL
    Posts
    170

    Question 8inch Setback vs 6inch Setback

    Would an 8 inch setback plate provide any better holeshot by changing the moment about which the boat breaks over? If so can you get 2 inch extensions that will work with a Slidemaster 6 inch plate? What are the advantages of more or less setback?

  2. Member JStew's Avatar
    Join Date
    May 2006
    Location
    North Little Rock, AR
    Posts
    5,328
    #2
    In theory - the longer plate will allow you to run the motor higher depending on the water rise behind the boat. If you run the 2" extensions - they have to be installed between the motor and the plate since BC runs a 6 hole plate.